GWME-7.1.0-2 - Archive Patch

You are viewing an old version of this page. View the current version. Compare with Current  |   View Page History

Background

This patch applies to GroundWork Monitor 7.1.0.

Problem

The archive database in GroundWork Monitor 7.1.0 requires schema changes for regular archival to complete successfully. Consequently, archiving is broken in the 7.1.0 release. This affects both fresh installs of 7.1.0 and for upgrades to 7.1.0.

A secondary issue, is that archiving was overly aggressive removing records required for the Availability Graphs in Status Viewer to display properly after older data had been aged off.

Solution

To address the above issues we are providing a patch. Bundled into this patch are upgraded archiving scripts that perform more selective delete operations in the runtime database, preserving the important data points even though they would have otherwise aged out.

This fix means the archiving software will no longer remove useful data, but by itself it does not replace the important data points which have previously been deleted from the runtime database.

The TB7.1.0-2.archive-fixes.tar.gz tarball attached to this article provides replacement files for the 7.1.0 release to get daily archiving back in order.

There are currently no attachments on this page.
Run these commands as the nagios user.
Whether for a freshly-installed 7.1.0 or for a 7.1.0 which was upgraded from some previous release, run all the following steps while logged in as the nagios user.

Steps for all types of 7.1.0 installs

Before you install the replacement files, back up the existing files:

cd /usr/local/groundwork/config
cp -p log-archive-receive.conf log-archive-receive.conf.orig
cp -p log-archive-send.conf    log-archive-send.conf.orig
mkdir -p /usr/local/groundwork/gw-backup
tar cfz  /usr/local/groundwork/gw-backup/archiving-backup-files.tar.gz \
    -C /usr/local/groundwork \
    config/log-archive-receive.conf \
    config/log-archive-send.conf \
    core/archive/bin/log-archive-receive.pl \
    core/archive/bin/log-archive-send.pl \
    core/databases/postgresql/Archive_GWCollageDB_extensions.sql \
    core/migration/postgresql/pg_migrate_archive_gwcollagedb.pl

Next, install the new files, here assuming that the tarball has been placed into the /tmp directory:

tar xvf /tmp/TB7.1.0-2.archive-fixes.tar.gz -C /usr/local/groundwork

Then compare the old and new config files. Resolve differences between any previously localized settings and those that came in with this patch. The patch includes support for the auditlog, hostname, hostidentityid, and hostblacklistid tables to be archived, so you should keep that setup as-is in the new config files.

cd /usr/local/groundwork/config
diff log-archive-receive.conf.orig log-archive-receive.conf
diff log-archive-send.conf.orig    log-archive-send.conf

Edit as needed:

vim log-archive-receive.conf
vim log-archive-send.conf

Additional steps for a freshly-installed 7.1.0 release

If your system was installed with 7.1.0 without upgrading that system from a previous release, follow these steps. This will re-create the archive database from scratch.

If you upgraded to 7.1.0 or migrated a gwcollagedb and/or archive_gwcollagedb database from an earlier version, you must instead follow the procedure in the Additional steps for systems upgraded to 7.1.0 from a previous release section, below.

Run the following commands in a bash shell. Each run of $psql will ask for a password. Respond with the administrative password of the PostgreSQL-database postgres user.

psql=/usr/local/groundwork/postgresql/bin/psql
scriptdir=/usr/local/groundwork/core/databases/postgresql
$psql -W -U postgres -d postgres            -f $scriptdir/create-fresh-archive-databases.sql
$psql -W -U postgres -d archive_gwcollagedb -f $scriptdir/GWCollageDB.sql
$psql -W -U postgres -d archive_gwcollagedb -f $scriptdir/Archive_GWCollageDB_extensions.sql
$psql -W -U postgres -d archive_gwcollagedb -f $scriptdir/GWCollage-Version.sql

Do not worry about the following message that appears when you run the Archive_GWCollageDB_extensions.sql script:

NOTICE: constraint "host_hostname_key" of relation "host" does not exist, skipping

It is only a NOTICE, not a WARNING or ERROR, and it is normal and expected.

Additional steps for systems upgraded to 7.1.0 from a previous release

If you either upgraded your present 7.1.0 server from a previous release of GroundWork Monitor, or you installed a fresh 7.1.0 release and then imported databases from a previous release of GroundWork monitor, this section is for you.

Run the scripting needed to repair the structure and content of the archive database, in this order:

cd /usr/local/groundwork/core/migration/postgresql
./pg_migrate_archive_gwcollagedb.pl
./conflicting_archive_service_rows.pl -m show
./conflicting_archive_service_rows.pl -m remove
./conflicting_archive_service_rows.pl -m show

The conflicting_archive_service_rows.pl script, when run with the -m show options, will show you if any archive-database rows need to be deleted to synchronize with the runtime database. You will be asked to type in the PostgreSQL administrative password to perform these steps. If you see this message in the results:

There are no colliding rows to worry about.

there will be no reason to run the script again with the -m remove options. However, if you see rows something like this:

+-----------------+--------------------------+------------------+------------------+
| servicestatusid |    servicedescription    |   old_hostname   |   new_hostname   |
+-----------------+--------------------------+------------------+------------------+
|           15137 | Arbitrary.HealthCheck    | IJONES-ATO       | ijones-ato       |
|           13957 | External.Response.Period | BOOKS.domain.com | books.domain.com |
|           14453 | Arbitrary.HealthCheck    | TSMITH-ATO       | tsmith-ato       |
+-----------------+--------------------------+------------------+------------------+

then you will need to run the -m remove form of the command to clean up these rows. You should see:

3 rows were deleted.

Afterward, run the -m show form again to demonstrate that all of the required cleanup has been done.

Notes for all types of 7.1.0 installs

Below is background data to help understand what to expect from the updated archiving process.

Archiving is normally scheduled to run at 00:30 each morning, via a nagios user cron job. You can check to see whether it succeeded or failed by looking at the archiving log files:

/usr/local/groundwork/foundation/container/logs/log-archive-receive.log
/usr/local/groundwork/foundation/container/logs/log-archive-send.log

A quick check of the status of the last run can be made this way, without examining the whole files:

tail /usr/local/groundwork/foundation/container/logs/log* | egrep -i 'SUCCEEDED|FAILED'

Archiving cycles cannot be run immediately back-to-back. The minimum_additional_hours_to_archive parameter in the config/log-archive-send.conf enforces a minimum delay period between cycles. This setting should not be altered as it will not achieve any speedup in the archival process.

After the steps listed above, daily archiving should run without error. If there number of records ready to be archived is of sufficient size, it should be expected that the first few runs of archiving may take a fair amount of time to run.

For safety reasons, records are not deleted from the runtime database until that data has lain in the archive database for a few days; this is controlled by the post_archiving_retention_days_for_messages and post_archiving_retention_days_for_performance_data configuration parameters in the config/log-archive-send.conf file. Normal operation will not require these settings to be changed.

First archiving run after fixes are installed

The first run of log archiving after a hiatus is special.
The initial run of archiving after you install the fixes described above might be best run by hand (see the instructions below).

The initial run of archiving on a production system or after a hiatus is special, because it needs to sweep up all the accumulated legacy data at one time. See the Initial application of archiving section below for the considerations to address before the first run. Subsequent runs will only archive data which has not yet been archived (subject to configured redundancy). If a run is skipped, there will be no loss of continuity; generally speaking, all the data which would have been archived in the skipped run will simply be picked up in the following run. Missing a run could happen due to both major events (say, you have a power outage one night), or minor events (say, you have a temporary failure in hostname resolution, so the scripting cannot connect to the archive database at the moment it first needs to do so).

Initial application of archiving

The initial run of the scripting on a production system, or a run after a long hiatus, should have dump_days_maximum set to 10000, which is the default value for this parameter in the shipped send-side config file (config/log-archive-send.conf). This setting will archive all data from the Pleistocene era until midnight last night, in the local timezone. For a large site which has been running a long time with fine-grained performance data, this could require a lot of space in the filesystem, and a lot of CPU and disk activity. You should plan for that, perhaps by running the sending script manually the first time (as the nagios user) during a weekend maintenance window. To do that, you may need to temporarily disable the software by either commenting out the nagios-user cron job that runs the nightly archiving:

30 0 * * * /usr/local/groundwork/core/archive/bin/log-archive-send.pl -a

or via the enable_processing directive in the (config/log-archive-send.conf) config file.

Have enough disk space available for staging data transfers
When archiving is first put into play, or after a long hiatus, there will be a very large backlog of message and performance data to be transferred to the archive database. This data is staged in files, and the same data will appear in multiple sets of those files (for safety purposes). Make sure you have enough space in the filesystem on the source and target machines where these files will be stored (listed as the values of the log_archive_source_data_directory and log_archive_target_data_directory in the config/log-archive-send.conf and config/log-archive-receive.conf configuration files).

For purposes of estimating the amount of space needed, the sizes of the logmessage and logperformancedata tables in the gwcollagedb database are most critical:

select count(*) from logmessage;
select count(*) from logperformancedata;

While the details will vary from site to site, a reasonable first estimate is to allow 200 bytes per logmessage row, and 61 bytes per logperformancedata row, for each copy of these tables that will be retained in the filesystem. Multiply the space so determined for one copy by the source_dumpfile_retention_days parameter in the log-archive-send.conf config file on the source machine, for the space needed on the source machine. If your target machine is different from your source machine (this is not a common scenario), multiply the space so determined for one copy by the target_dumpfile_retention_days parameter in the log-archive-receive.conf config file on the target machine, for the space needed on the target machine.

Example: We have 768539 logmessage rows, and 118465 logperformancedata rows in our runtime database. Dumping out this data into files will take around:

768539 message_rows * 200 bytes/message_row
    + 118465 perf_rows * 61 bytes/perf_row = 160934165 bytes

With source_dumpfile_retention_days set to 11.5 (the default value, as shipped), this yields:

160934165 bytes/dataset * 12 datasets = 1931209980 bytes

Which is to say, you would need to ensure that about 2 GB of space is available on the source machine, in the log_archive_source_data_directory filesystem (normally configured as /usr/local/groundwork/core/archive/log-archive), for the initial period of archiving this example database.

To run archiving manually, you must do so as the nagios user:

su - nagios
/usr/local/groundwork/core/archive/bin/log-archive-send.pl -a
# Check to see whether the archiving worked as expected.
tail /usr/local/groundwork/foundation/container/logs/log* | egrep -i 'SUCCEEDED|FAILED'
exit
Enter labels to add to this page:
Please wait 
Looking for a label? Just start typing.